You get all these tools in this set:

1. STH = Simple Turner and Hollower
2. S90D = Simple 90° Detailer
3. SR = Simple Rougher
4. S55D =Simple 55° Detailer
5. SSCF = Simple Shear Cutting Finisher (5/8" Round Shaft)

These full-size carbide tipped wood turning tools are " square (except the SSCF is 5/8" round) X 12" long when unhandled. When used in the handle, the tools are 9.5" long and the overall tool and handle length is 26.5".The tool and handle together weigh 2 lbs 5 oz.These tools will work in the.

Tool Use:

TheSimple Turner and Holloweris the simplest to use carbide tool on the market. You'll appreciate the simplicity with which your project can quickly be turned and hollowed to the desired shape using this tool.

TheSimple Shear Cutting Finisher (5/8" Round Shaft)is a finishing tool that leaves and excellent surface finish so sanding is reduced to a minimum. Requires a bit of practice to master, but is often the favorite tool of them all. An excellent all-around tool for wood and resin/epoxy projects.

TheSimple Roughercarbide tool makes roughing much simpler & less physical as most of the shock created by interrupted cuts is absorbed in the tool rest instead of your hands & arms. The square with 6" radius cutter is the most popular and easiest to use cutter for this tool. You can also swap the cutter for the negative rake angle cutter.

TheSimple 55 Detailercarbide tool that provides a much higher level of woodturning creativity.

TheSimple 90° Detaileris for detail work such as beads and cutting perfectly square inside corners. Also a great tool for rapid material removal especially inside a bowl.

Full Size Tool Details:

Square shaft tools are CNC machined from ” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. The 5/8" round Simple Shear Cutting Finisher is CNC machined from solid stainless steel. That allows it to be rotated about it's axis so the cutter can be presented to the work at an angle, giving you that shear cutting action. These full size tools feature an overall length of 12", with a handle tang of " diameter x 2" length.

Tool Engraving:

Each square Simple Woodturning Tool is engraved so you know exactly what tool you have. That makes finding replacement cutters very simple! Look for authentic Simple Woodturning Tool replacement cutters.

• STH = Simple Turner and Hollower
• S90D = Simple 90° Detailer
• SR = Simple Rougher
• S55D =Simple 55° Detailer
• SSCF = Simple Shear Cutting Finisher (5/8" Round Shaft)

Handle Details:

The most beautiful lathe tool handle on the market, 100% USA made by American craftsman. CNC machined from solid aircraft aluminum for balance, durability, and to last for years. Covered with a soft, comfortable foam rubber grip to reduce hand cramping during long turning sessions and for great tool control. Overall length is 17"; outside diameter is 1 3/8"; tool opening is " diameter. Tools can be easily changed by loosening the two stainless steel set screws.

Benefits of Carbide Lathe Tools:

Simple to use for all skill levels making woodturning fast and more enjoyable. You can focus on your project and not on techniques or sharpening. No long learning curve or expensive sharpening equipment. You can begin turning as soon as your box arrives because each tool comes with a very sharp, rotatable carbide cutter. Just rotate the cutter head turn for a clean, sharp edge and you are back to turning wood.

Watch video demonstrations here.

Replacement carbide cutters are available.

Every woodturning tool in this package will work in our Simple Hollowing System.